Gas Turbine – Power Gen
The positive displacement, multi-circuit, oil lube and scavenge pump is designed to provide three independent pumping functions; lube oil supply to the bearings of the turbine and scavenge of oil from two independent oil sumps. Download PDF 
Gas Turbine - Marine
A custom designed, multi-circuit, gerotor pump provides seven independent functions; lube oil supply to the turbine bearings, oil scavenge from five independent oil sumps, and a high pressure circuit for actuation of the turbine VIGV’s. The positive displacement pump is a modular construction that can be easily adapted to support different engine configurations. Download PDF
100 Kilowatt Microturbo Generator
The Lube Pump consists of a positive displacement gerotor pump mounted directly to a 24V, permanent magnet, brushless dc drive motor. The lube pump housings are machined from 356-T6 aluminum castings that are coated with a teflon impregnated hard anodized finish for corrosion protection. Download PDF
Gas Turbine – Power Generation
A custom designed, multi-circuit gerotor pump provides six independent functions; lube oil supply to the turbine bearings, and oil scavenge from six oil sumps. The positive displacement pump is a modular construction that can be easily adapted to support different engine configurations such as marine propulsion or power generation. Download PDF
Gas Turbine – Power Generation
A custom designed, multi-circuit, gerotor pump provides four independent functions; lube oil supply to the turbine bearings, and oil scavenge from three independent oil sumps. All circuits feature cast ductile iron housings with gerotors carried on a hardened AISI 8620 steel shaft, supported by steel backed PTFE-lead impregnated bronze journal bearings. Download PDF
Gas Turbine – Mechanical Drive
The multi-circuit gerotor pump assembly provides five independent pumping functions; oil supply for gas generator lubrication, high pressure oil for variable inlet guide vane actuation, and independent scavenge to each of three engine bearing compartments. The pump installs vertically into the supply oil reservoir, with the pump housings submerged in the oil and the drive motor mounted directly above. Download PDF
Lube & Scavenge Pump for Pratt & Whitney FT4 Turbine
Cascon’s FT4 lube & scavenge pump is a multi circuit gerotor pump designed in accordance with Turbo Power and Marine Systems (predecessor to P&W) original equipment specification IPA 6262. Our FT4 lube & scavenge pump is a direct replacement to the Nichols Model GM626 lube oil pumps originally installed on the power turbine lube skid. Download PDF
Gas Turbine – Marine
The gerotor pump assembly consists a multi circuit, positive displacement pump, pump mount, drive coupling, and a 1.1 kw, 3 phase marine duty electric drive motor. The gerotor style pump consists of one independent scavenge circuit rated at 550 lph, and a lube oil circuit rated at 220 lph. Download PDF
Micro-Turbine Generator
The liquid fuel metering pump consists of a rolling contact, positive displacement pump rotor (known as an IGR), with an integral brushless dc drive motor and digital electronic controller. The fuel pump is capable of precisely metering fuel over a turn down ratio of up to 50:1. Download PDF
Gas Turbine – Mechanical and Electric Drive
The multi-circuit gerotor pump assembly provides six independent pumping functions; oil supply for gas generator bearing lubrication, and independent scavenge circuits for six engine bearing compartments. Each of the six scavenge housings contain magnetic chip detector-strainer assemblies and resistance temperature detector (RTD) ports. Download PDF
